Central heating
Systems
Our expert engineer staff determines the most economical and efficient system suitable for the building's features as a result of on-site studies and presents you with an alternative offer. According to your preferences, the project is designed and the system is installed.
Floor Standing Boilers
Today, as a result of the development of technological systems, floor-type boilers are generally used in heat centers with very high capacity heat needs, in large buildings such as shopping malls, official institutions and organizations, and since fuel consumption is very high in these devices, efficiency is very important. In device selection, features such as pump, valve automation of the devices to be used in the heat center are of great importance according to the building condition and the condition of the installation it will feed.
Wall Mounted Boilers
The widespread use of natural gas and the reduction in the size of boilers due to the effect of technology have increased the use of wall-mounted devices. Wall-mounted devices manufactured in capacities of 35-50-60-100-120-150-160 kW are widely used due to their high efficiency, light weight and features that allow for parallel (parallel) connections according to the needs of each building.
It is one of the preferred systems due to the fact that high capacity can be achieved by two or more devices working together, called Kas kat connection, it provides ease of projecting, redundant operation and creates a wide modulation range.
.webp)
In condensing systems, the high amount of condensation water coming from the chimney or formed inside the device is directly discharged to the sewerage system, which damages the city network and building lines. Due to the carbonic acid properties of the waste water, it especially melts the concrete lines. In order to avoid this, a neutralization tank should be used in systems where condensing boilers are used.
Central Heating System Automation
Automation of heat centers or boiler rooms is a must for the management of variable weather conditions or instant hot water demands since there is no one constantly at the helm. Automation of heat amount will provide the control of your devices and/or devices that consume high amounts of energy in the most efficient and safe way under the desired comfort conditions. It will provide boiler water temperature according to the outside temperature, production of domestic hot water requirement at the desired temperature, and provision of different heat needs according to the building facades in large buildings.
Water Softening Devices
Since the installation in central heating systems takes a lot of water, the hardness of the water affects the life of the devices used in the system, especially the boiler and boiler. If the necessary precautions are not taken during the installation, it will cause a decrease in the efficiency of the boiler and boiler and will cause them to become unusable after a while. Since the manufacturers do not cover such situations under warranty, it causes high costs. For these reasons, water hardness should be measured in central systems and a water softener should be used if necessary.
Central Hot Water Systems
In buildings heated with central systems, hot water production is generally integrated with the central heating system. In such installations, hot water is produced with a boiler or a plate heat exchanger + accumulation tank system. In these systems, it is of great importance to provide hot water at the desired comfort conditions at the time of need. Control of this is linked to the selected automation system and pumps. The hygiene of water kept in a tank at a high level of around 50 C is of great importance. Mistakes made can cause the building occupants to catch legionnaires' disease. It is very important that the boiler is selected by a professional.
